1.2 Button details
K1: Short press, record/stop recording video
Long press for 10S, reset to factory setting
S1: Turn left: ON, Turn right: OFF
1.3 LED Status
L1: BLUE ON: Stop recording in Micro-SD card
BLUE FLASH: Record in Micro-SD card
RED, ON: Charging. OFF: Charging fully.
L2: GREEN OFF: AP mode
GREEN ON: Device mode
GREEN FLASH: Try to connect to router
1.4 Brief Introduction
* Download and install the APP
RTCAM
* Switch on S1 to power on the clock
Press K1 for 10s to reset the camera to factory setting is
recommended. It will take about 35s.
* Open the APP
RTCAM
, connect mobile phone to camera
directly in AP mode
http://jedmark.com
Summary of Contents for IPC180
Page 10: ...http jedmark com...
Page 11: ...Full Screen touch the screen to control the voice and image http jedmark com...
Page 12: ...In Other Setting of Edit Camera LED can be turn ON or OFF http jedmark com...
Page 13: ...In Alarm Setting of Edit Camera Motion detection and Notification can be set http jedmark com...
