●
When the headlight is turned on, the taillight will also blink for increased visibility.
●
Gear speeds are approximate. Actual speed may vary due to terrain, rider weight, and/or other factors.
6.2
How to Start - For your safety, you must read and follow all the instructions in this part.
Please wear a helmet and knee pads in case of falls and injuries when operating the scooter.
1. Turn on the scooter, and check the power indicator
2. Step on the deck with one foot, and slowly kick off the other
3. When the scooter starts to cruise, put both feet on the deck and press the accelerator to engage
motor. The bigger the pressure, the faster it will go.
4. DO NOT press the left brake when you ready to go, because it will active the E-ABS, the motor won't
be engaged.
NOTE: The electric scooter must be moving at 3 miles per hour before the motor will engage.
6.3
Cruise Control
Step 1. Accelerate to reach the desired speed.
Step 2. Hold the throttle for approx.
5-10
seconds to turn on Cruise Control and maintain speed.
Step 3.
Use gentle pressure on the throttle or brake to turn off cruise control.
6
.
4
Practicing Guidelines
Practice until you are comfortable with using all of the scooter’s functions. See the following tips below.
●
Wear casual clothing and flat, closed-toe shoes to maintain your flexibility and stability.
●
Practice until you can easily get on, move forward, turn, stop, and dismount with ease.
●
Make sure the pavement is even. Do not operate on a slope until you are experienced.
●
The ESKUTE ES MAX is designed for relatively smooth, flat terrain. When driving on uneven terrain,
slow down.
●
Until you are comfortable using the scooter, avoid operating in places with pedestrians or obstacles.
7.
MAINTENANCE
●
Do not perform any maintenance when the power is on, or the battery is charging. Do not let water or
liquids get into the scooter as this will cause permanent damage to the electronic components.
●
After each ride, especially if you have traveled a long distance, inspect your scooter.
1
.
Inspect the brake to make sure it’s working properly.
2
.
Make sure all screws and bolts are taut and properly fastened to prevent injury and unnecessary wear
and tear.
For questions, concerns, or part replacement, please contact customer service.
7
.1 Cleaning
The ESKUTE ES MAX may need cleaning after riding for extended periods of time. See the following tips
below.
●
Completely power off the scooter before cleaning.
●
Use dry, non-abrasive cloth to gently remove debris or dust.
●
If needed, dampen cloth with water or a mild cleaner and wipe off the scooter.
●
Never use alcohol or ammonia-based cleaning solutions.
●
To slow down, gradually ease off the throttle and apply pressure to the brake. (Without a foot brake,
Do not keep your feet on the rear fender.)
●
To stop, apply full pressure to the brake until the scooter stops completely.
1.Handles
2.Brake
3.Bell
4.Headlight
5.Display
6.Power Button
7.Throttle
- 06 -
1
6
7
5
2
4
3
