2
D50 MODEL SERVICE MANUAL
SINGLE & DOUBLE PLANETARY AUGER DRIVES
This manual will assist in the disassembly and assembly of the above model Planetary Auger Drives. Item numbers, indicated in pa-
rentheses throughout this manual, refer to the exploded parts breakdown drawing. Individual customer specifications (mounting case,
output shaft, brake assembly, etc.) may vary from exploded drawing and standard part numbers shown. If applicable, refer to individual
customer drawing for details.
For any spare or replacement parts, contact your distributor or equipment manufacturer. Always try to have available the auger drive unit
part number, serial number and date code on the serial tag; this information may be necessary for verification of any component part
numbers. Component part numbers and/or manufacturing lot numbers may be stamped on individual parts; this information may also be
helpful in identifying replacement components.
LUBRICATION & MAINTENANCE
Change the oil after the first 50 hours of operation.
Oil should be changed at 500 hour intervals thereafter. All gearboxes require a
GL-5 grade EP 80/90 gear oil for lubrication. Manufacturer also recommends that unit be partially disassembled to inspect gears and
bearings at 1000 hour intervals.
Model
Oil Capacity
Oil Level
Single Stage
2 pints / 0.95 liters
To horizontal centerline of gear drive
Double Stage
2.5 pints / 1.18 liters
To midway on upper/primary gear set
CONTENTS
Example Part Number .................................................................................................. 1
Lubrication & Maintenance.......................................................................................... 2
Unit Disassembly Procedure....................................................................................... 3
*Primary Planet Carrier Subassembly ........................................................................ 3
Secondary Planet Carrier Subassembly .................................................................... 4
Base Subassembly....................................................................................................... 4
Unit Reassembly .......................................................................................................... 5
Single Stage Exploded View Drawing ........................................................................ 6
Double Stage Exploded View Drawing ....................................................................... 7
Eskridge Product Warranty ......................................................................................... 8
Warranty Return Policy.......................................................................................8
Other Eskridge Products ............................................................................................. 9
