User Manual
Page 13
4.
By pressing the thumb accelerator 3 times this engages Zero Start.
5.
By pressing the thumb accelerator 4 times cancels the speed limitation on the controls.
6.
By pressing the thumb accelerator 6 times sets a maximum speed limit to 20km/hr
7.
By pressing the thumb accelerator 8 times sets a maximum speed limit to 12km/hr.
Please ensure that you observe all local, national and international regulations in relation to the speed
and use of the e-Skoot.
4.4.1 Cruise control
You can set up the speed as you want during the driving, and the scooter will start moving on the same
speed afterwards. Press the acceleration right thumb and keep the same speed for 5 seconds and the
cruise control will automatically enter. You can switch the function off easily as well.
4.5
Zero start
This function is for safety. When Zero Start is engaged, you should use your foot to slide e-Skoot for a
little distance, then press the right thumb accelerator and the scooter will go ahead. With Zero Start
engaged, the accelerator will not work, if accidentally touched.
5
Battery & Charger
Each
e-Skoot
electric scooter is equipped with a special lithium polymer (LiPO) battery and special smart
charger. The accessories that come with each scooter have a dedicated number. Please do not use the
chargers from other brands. The use of any charger other than that supplied with e-Skoot immediately
invalidates the Warranty on the scooter.
5.1
Battery
When you get the
e-Skoot
electric scooter for the first time, please charge the battery fully before using.
The battery can be charged at any time, even if already partially charged. When fully charged the charger
will automatically stop charging and will not cause any damage to the battery.
Warning
: do not use batteries from other brands, they will not work with
e-Skoot
scooter.
Please charge the battery once every three months if not using the scooter. Water immersion, collisions,
and other abnormal factors will lead to battery damage and are not covered under Warranty.
