User Manual
Page 10
c.
Breaking Control
Press the left thumb brake (2) and the electronic magnetic brake will operate. The greater pressure you
put, the greater breaking force will be. For additional braking power, press the rear brake and both front
and back brakes will engage.
d.
Horn
When the power is on, press the horn button (6) and it will hoot.
f.
LED Headlight
In manual mode: Press the On/Off Light button when needed and there will be a sign in display indicates
the light is turn on. Press the button again when you do not need the light.
The scooter is equipped with a sensor light that detects the need of light. The light will turn on
automatically (auto light mode) if the sensor detects poor ambient light.
For example: when is cloudy weather and the auto light mode is on, the light turns on. If the daylight is
sufficient, the auto light mode detects the light and the headlights will go off after 5 seconds.
On auto light mode, the display is also lit depending on the level of ambient light. If the scooter is on auto
light mode, you can go to manual mode by pushing the On/Off Light Button.
g.
Mileage Display
When the display is powered on, it displays three modes: total, trip and time. You can change it by pressing
the settings button. In
'trip'
mode, press the setting button
(S)
for 3 seconds and it will clear the trip.
h.
Emergency
In an emergency, it is recommended to use the foot brake.
3.3
Display Factory Settings
To access the menus P0 and P1 please press the switch (3) and setting (4) buttons simultaneously. Further
pressing the setting button (3) helps you switch between P0 and P1.
Both menus have two further submenus: 0 and 1:
P00 (European Mode) (a) - displays the speed in km/h and temperature in Celsius degrees
P01 (USA Mode) (b) – displays the speed in miles/hour and the temperature in Fahrenheit degrees
P10 (c) – lights are set on manual mode
P11 (d) – lights are set on auto mode
You can switch between menus 0 and 1 in P0 or P1 by pressing the Switch (3) button.
Press the setting button
(S)
(4) to exit the Settings menus and store the settings.
