12
21
D
21
C
2XScrews
(ST5*50)
Fix lower decorative chimney
Hook the hood body
Hook the hood body to the hood fixing bracket
20
.
Level the hood body itself.
Fix a Chimney fixing bracket
21
with 2 screws
1
0
(ST5x50)
at the horizontal line
C
to prevent the hood body from
accidently sliding off the hood fixing bracket.
Fix the exhaust pipe on the hood body.
Connect chimney and hood body with 2 screws
12
.
Connect chimney fixing bracket
21
and chimney
with 2 screws
12
.
Right
Wrong
Fix the brackets:
Drill holes at the marked points with a
ɸ
10 mm drill bit.
Insert the Wall Plugs
11
into the holes.
Fix the hood fixing bracket
20
with 3 screws
10
(ST5x50)
supplied with the hood at the horizontal line
B
.
Chimney fixing bracket
21
with 2 screws
1
0
(ST5x50)
supplied with the hood at the horizontal line
D
.
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney
using either a flexible or rigid pipe ɸ 150 or ɸ 120 mm, the choice of
which is left to the installer.
If to install a ɸ 120 mm air exhaust connection, insert the reducer
flange
3
on the hood body outlet.
Fix the pipe
4
in position using sufficient pipe clamps (not supplied).
Remove possible charcoal filters.
2
3
4
5
6
7
8
9
10
11