Eskimo ES 1096 WC Instruction Manual Download Page 7

Proper use of wine cooler

Names of components

Placement

 

 

 

The cooler is placed in a well-

ventilated indoor place; the 

ground shall be flat, and sturdy 

(rotate left or right to adjust the 

wheel for levelling if unstable).

Before using the cooler,

remove all packaging 

materials including bottom 

cushions and foam pads 

and tapes inside the cooler, 

tear off the protective film 

on the door and the cooler 

body.

Avoid direct sunlight and heat 

sources such as stove, heating 

radiator, etc. If the cooler has 

to be put next to hear source, 

a suitable insulation board shall 

be applied or keep the cooler 

away from heat source by 

following minimum distance: 

Stove: 3cm.

Oil furnace or coal stove: 30cm

The hot air from side wall of 
cooler shall be exhausted 
unrestricted, or compressor's 
power will increase and further 
increase power consumption. 
Thus the distance between 
cooler and walls or neighboring 
furniture shall not less than 
4cm. It is also necessary to 
maintain distance for doors to 
open at least 90

°

.

The room for cooler shall become 

larger with more refrigerant in 

cooler, with 8g refrigerant 

3

corresponding to 1m  spaces. 

The content standards of 

refrigerant are labeled in name 

board on backboard of cooler. 

Start to use

The wine cabinet first start to stand for half an hour and then plug in the power.

Do not connect cooler to electronic energy saving plug and  convert DC to AC 

converters (E.g.: solar energy system, ship grid).

Clean up the inner chamber before put into use for first time (Refer to cleaning).

Water drop or frost will be generated on R's back when compressor is functioning, 

which is decided by function of cooler. Dispense wiping out frost or drop as the back

will wipe them out automatically. The defrosted water will be collected into drain tank, 

then inflow into water disposal pan above the compressor and vaporized.

5

Wine cooler you buy some of the features and accessories may be

entirely consistent with the legend, please refer to the object.

 not 

Temperature control display

Wine Shelf

Wine Basket

Adjustable feet

water utensil

Summary of Contents for ES 1096 WC













Reviews: