8
Introduction to the wine cooler's functions
Operation panel
Lock key
Lighting mode key
Display area
Temperature-rise key
Temperature-drop key
Display Control
When electrify for the first time, the display screen will be full display for 3 seconds, and the start-up tone
will ring, and then enter into the display of normal operation;
When it is in the lock state, the display screen will be cut-off if no key operation for 30 seconds; the display
screen recover the normal display if any key operation.
Except the lighting function, the following functions will be carried out under the unlock state.
Locking and unlocking
Under the lock state, press the Lock key ( ) continuously for 3 seconds, the locking will be relieved; the
display area will flicker;
Under the unlock state, press the
"
Lock key ( )
"
continuously for 3 seconds to enter into the lock state;
"
"
Lighting mode
Press the Lighting mode key ( ) to turn on or turn off the light.
"
"
Switching of the Fahrenheit temperature and Celsius temperature
Press the Temperature-rise key ( ) and the Temperature-drop key ( ) to finish the switch of the Celsius
temperature and Fahrenheit temperature; the display area will show the setting Fahrenheit temperature or
Celsius temperature under the current mode.
"
"
"
"
Temperature setting
Press the Temperature-rise key ( ) , the temperature will increase 1
℃
(or ). After locking, the cooler will
operate according to the setting value;
Press the
"
Temperature-drop key ( )
"
, the temperature will decrease 1
℃
(or
℉
). After locking, the cooler will
operate according to the setting value.
"
"
℉
Setting range of the Celsius temperature: 5
℃
~18
℃
; setting range of the
Fahrenheit temperature: 41
℉
~65
℉
.
Memory function
The cooler has the power off memory function. After the power is on again, the cooler will work according to the
setting mode before the power-off.
Fault indication
If the indication of the following table is displayed on the display area, it means the cooler is with faults.
Fault code
Description
E1
E4
Temperature sensor of the
refrigerator with fault
Defrosting sensor of the
refrigerator with fault
When the above faults are displayed on the screen, please do not disassemble to
check by yourself. Please contact the special maintenance personnel of the local
after-sales service company for the maintenance.
This cooler adopts the touch control of the glass door. Touch slightly when pressing the keys. It is to be avoided that
the area of the display panel is scratched by the sharp things and it shall be kept away from the environment of high
magnetic field and high humidity. Otherwise the cooler is possible not to be set and operate normally.