www.esid.se
Page:
7 / 43
Name of document:
eSID 03-06 User Guide
Version:
1.2
Transition between Active and Passive state
Switching between the states occurs:
a)
If the driver presses the INFO switch on the SIDC for more than 1.5 seconds a switch between
active and passive state will occur.
Note! eSID can only go to active state if the Ignition Key is in ON.
b)
If reverse gear is engaged on a vehicle with Parking Assist, the system will switch from active
to passive state (if currently in active state). It will switch back automatically to active state
when reverse gear is no longer engaged
c)
If a popup warning is triggered to be shown to the driver (Icon and text) the standard system
requests the information icon in the instrument cluster to be activated (“ i “). eSID listens to
this request and will switch to passive state (if currently in active state), to show the message
to the driver.
Example warning that will trigger eSID to go passive
d)
When the driver door is opened and the conditions to trigger the welcome message is
fulfilled it will switch from passive to active state (and show the welcome message).
e)
If Auto start is enabled it can trigger eSID to go from passive to active state (see separate
section)
f)
If the Ignition key is removed from the Ignition switch, the eSID will be switched to passive
state.
