ESI WaMi Box, Owner'S Manual, Page: 27 / 35

2 3
3. Line Out 3 and 4 to outboard signal processor/effect box (Line Out 3 and 4
serves as effects/aux sends). You can also use Line out 3 and 4 as additional bus
to multitrack tape recorder.
Advanced Connections
WaMi Box Mixer in 4 CH Mode
The difference between 4 CH Mode and the FX Mode is that in 4 CH Mode, Wave
channels’ Reverb and Chorus effect sends are disabled. Instead, Outputs 3 and 4 are
available on all Wave input channels. The Outputs 3 and 4 can function in 2 ways:
1. As an auxiliary send to route effect send signals from Wave Modules to the
outboard signal processing equipment, such as more elaborate digital effects
system. To do so, make the connections as shown above.
(In this case you can
simply connect the output returns of the effects processor to the LINE IN of WaMi
Box and control its level with the INPUT Module fader.)
You can still use reverb
and chorus on the MIDI module.
2.
As an additional output bus to route Wave sounds to multitrack recorder. In this
case, WaMiBox Mixer functions as a 4-bus recording console.
Mixer/ATR
Output Input
Output
EFX
Input
CD-Recorder
Output Input
Digital Mixer