ESI WaMi Box, Owner'S Manual, Page: 18 / 35

1 4
Controls SEND level of Wave channels to REVERB and CHORUS effects. As
you can see the arrows under it signal routes to Reverb and/or Chorus effect.
Using level knob, you can set desired amount of SEND level. You can also switch
channel mode with the switch located on the bottom of the section between FX(2
channel mode and 4channel mode).
3. MOD
This section is not supported currently.
4. AUDIO IN
Controls SEND level for audio input.
5. REVERB
You can select reverb type and adjust its value using appropriate knobs. You can
turn on or off with the button described as “Reverb“.
6. CHORUS
You can select chorus type and adjust its value using appropriate knobs. You can
turn on or off with the button described as “Chorus“.
7. EQUALIZER
In this display, you can see the curve which produces the equalizer settings. With the
4 channel equalizer you have the option to touch the curve at four points with one
click of the mouse, and to change it (at two points only in the case of the 2 channel
equalizer, of course - base and treble control). You are shown the values for the
increase or decrease, and the filter cut-off frequencies, at the top and bottom of the
display.
8. V-SPACE
You can set virtual 3D space effect value.