5
1)
PWR-Link : When you connect RoMI/O to the computer, this lamp will become red color.
2)
MIDI IN: This lamp indicates the MIDI input signal. This lamp will become Yellow color.
3)
MIDI OUT1, OUT2: If you send the MIDI signal to OUT1, the lamp will become Green color. In the case of
MIDI OUT2, the lamp will become Red color. If you send the MIDI signal to both OUT1 and OUT2, the
lamp will become orange color.
3. System Requirement
1) PC
Windows XP, 2000, ME
Intel Pentium III CPU or equivalent AMD CPU
Motherboard with Intel series chipsets or VIA chipsets
UDMA66/100 7200rpm hard disk drive
More than 256MB of RAM
2) MAC
MAC OS 10.1 or higher only
Macintosh with G3 or better processor (except the original PowerBook G3)
One available USB port
More than 256MB of RAM
* Caution
1. We don’t recommend using many USB devices with the RoMI/O via USB hub at the same time. It may cause
Input data lose.
2. Some old mainboard that using OHCI (open host controller interface) may cause problem.
3. Check our web site http://www.esi-pro.com occasionally for the most recent update information or technical
issues.
