IVX E-Class Administrator’s Manual
Function 1: System parameters
B.1
Function 1: System parameters
Function 13: Administrator password
These functions will display the existing password and prompt for entry of a new password. The pass-
words can be 2–8 digits long, followed by
#
.
The Installer can change either the Installer or
Administrator password. Only those functions listed in the Administrator Manual can be pro-
grammed via the Administrator password.
The default Administrator password is
4 5 6
.
Notes:
You can use the Administrator password to access a user’s station programming. At the station, when
prompted for the user’s password, enter either the Administrator password, then follow normal user
programming procedures.
Accessing user station programming
Should a user forget his password or if an employee leaves the organization, this feature allows the
Installer or Administrator to enter a user's station programming and operate within it as if he were the
user. From the user’s station, enter the
Administrator
password when the system prompts for the
user
password.
Example:
From station 105, entering
4 5 6 #
instead of the user password (
1 0 5 #
) will enter the station’s
user programming. (Default password shown for this example).
Function 14: System clock
Function 141: Set time/date
1.
Enter a new time in a
twelve
-hour format.
Example:
Enter
1 2 3 3
for
12:33
, or
3 1 5
for
3:15
(note that you need
no
leading zero for the time).
2.
Select
AM
or
PM
by pressing a scroll key (either
or
).
3.
Enter a new date in an
eight-digit
format,
including
leading zeroes.
Example:
Enter
0 7 0 4 2 0 0 3
for July 4, 2003 (note that leading zeroes
are
required here, unlike in
Step 1).
4.
Press
#
to finish the entry.
Note:
A built-in battery maintains the correct time and date, even in the event of a power loss.
