ESU22
ESI
9
4. ESU22 Control Panel
This chapter describes the ESU22 Control Panel under Windows. Under Mac OS X no special
Control Panel is required for ESU22. If you are using ESU22 under Mac OS X, please check
section 5.3 with more details.
To open the control panel double click on the ESI icon in the task notification
area. The following dialog will appear:
The panel has the following functions and sections:
INPUT
section
: this section controls the input monitoring volume of the incoming signal from the
hardware. A pair of mono faders can be controlled together or individually depending on your
mouse position The
Mute
button at the bottom allows you to mute the signal. A red
Mute
button
indicates that the mute function is enabled. When disabled, the button is gray.
OUTPUT
section
: this section controls the playback volume of the playback signal from your audio
applications. The pair of mono faders can be controlled together or individually depending on your
mouse position – perfect for stereo signals. The
Mute
button at the bottom allows you to mute
playback. A red
Mute
button indicates that the mute function is enabled. When disabled, the button
is gray.
Input selection
: the buttons on the left side allow you to select between the RCA line inputs on the
backside of the unit (
Line In
), the XLR microphone input on the front (
Mic
) and the Hi-Z
instrument input on the front (
Guitar
).
Monitoring
: the
Mon
button (located between
INPUT
and
OUTPUT
) allows you to enable realtime
input monitoring. Once enabled all incoming signals are audible through the output.
SampleRate
section
: under
Config > Sample Rate
you can select the operating sample rate of
ESU22.
