ESI ES1247B16A, User Instructions

Page: 12 / 20

12
Setting the Programmer Option (5/2, 7 day, 24hr)
1. Switch the slider to
HEATING
. Press either the
+/–
button
to move between 7 day, 5/2 day or 24hr operation.
5/2 Day operation is shown by MO, TU, WE, TH, FR
flashing (5 Day) and then SA, SU flashing (2 Day)
7 Day operation is shown by just one day flashing at
a time
24 hr operation
is shown by MO, TU, WE, TH, FR, SA, SU
flashing at the same time.
2. Wait 15 seconds to automatically confirm or press the
Home
button. Move the slider to
RUN
to return to
Run Mode.
Setting the Central Heating/Hot Water Programme
1. Move the slider to HEATING . Choose between 5/2 day, 7
day or 24 hr programmer operation (see above steps 1-2) .
2. Press the
Next
button. Press the
Day
button until
the desired day/block of days you want to programme
is flashing.
3. The display shows the 1st ON time. Press
+/–
to set the
time (10 minutes increments). Press the
Next
button.
4. The display shows the 1st OFF time. Press +/– to set the
time (10 minutes increments). Press the Next button.
5. The display will now show the 2nd ON time. Repeat steps
3-4 until all remaining ON/OFF periods have been set.
On the last OFF period, press the Day button until the
next desired day/block of days you want to programme
is flashing.