ESI ES1247B16A, User Instructions

Page: 11 / 20

11
The Factory Pre-Set Programme
This Channel Programmer has been designed to be simple
to use, requiring minimal user intervention with a pre-
programmed heating profile.
The pre-set heating times and temperatures will suit most
people (see table below) . To accept the factory pre-set settings,
move the slider to RUN which will revert the programmer to
Run Mode (the colon (:) in the LCD display will begin to flash).
N.B. Every time the reset is pressed, the programmer will default
to prog1 boost only.
7 Day:
In 7 day setting, the pre-set settings are the same as 5/2 Day
programme (Mon to Fri and Sat/Sun).
24 Hr:
In 24hr setting, the pre-set settings are the same as Mon to Fri
of the 5/2 Day programme.
Programming the unit
(Only when in program 0)
Event Std Time
Econ
Time
Std Time
Econ
Time
W
eek Days
1st ON 06:30 00:00
W
eek
ends
07:30 00:00
1st OFF 08:30 05:00 10:00 05:00
2nd ON 12:00 13:00 12:00 13:00
2nd OFF 12:00 16:00 12:00 16:00
3rd ON 17:00 20:00 17:00 20:00
3rd OFF 22:30 22:00 22:30 22:00
N.B. If 2PU or 2GR is selected, then events 2nd ON and 2nd OFF
are skipped