All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change.
ESERA GmbH, ESERA-Automation 2020
www.esera.de
11148 V2.0 R1.0 Manual
Page 2 of 4
3
Auto-E-Connect® Support
The ESERA
Auto-E-Connect®
1-Wire Plug and Play system will be used for the
1-Wire Bus supported. This enables fully automatic configurations of 1-Wire sensors
and actuators on the 1-Wire bus. It is optimized for industrial applications and
enables significant added value beyond the sensor and chip data.
The Auto-E-Connect function automatically recognizes ESERA chips, sensors and actuators, starts suitable
libraries and outputs fully formatted data.
The Auto-E-Connect functionality will be available from mid 2020 via 1-Wire Controllers, 1-Wire Gateways and
1-Wire ECO from ESERA available.
Further information on ESERA Auto-E-Connect can be found on the ESERA website, ESERA Config-Tool 3, or in
the download area for this article in the ESERA Webshop.
4
Technical data
1-Wire device:
DS18B20 temperature sensor
Measuring range:
-40°C to +60°C for entire 1-Wire Temperature Sensor Pro, limit values of temperature
range through sensor housing
Resolution:
12 Bit
Operating voltage:
3V to 5,5VDC
Current consumption:
max. 1 mA
Accuracy:
+/- 0,5°C in the range of -10°C to 85°C
Resolution temperature: 9 - 12 Bit, 0,5°C to 0,0625°C/ Bit, depending on selected resolution
5
Ambient Conditions
Protection type:
IP20
Protection class:
III
Temperature, operation: -25°C to 80°C, (limitation by carrier system, sensor -40°C to +125°C)
Air Humidity:
10 - 90% (non-condensing)
Outside dimensions:
80 x 80 x 29mm (LxWxH), suitable for mounting on flush-mounted boxes
6
Conformity
EN 50090-2-2
EN 61000-4-2, ESD
EN 61000-4-3, HF
EN 61000-4-4, Burst
EN 61000-4-5, Surge
EN 61000-6-1, Fault-free operation
EN 61000-6-3, Stray radiations
RoHS
7
Software / Control
The device is read by 1-Wire command for DS18B20 devices. The device is supported in many
computer programs like ESERA-Station Loxone, IP-Symcon, OWFS, FHEM, (Linux) or microcontroller
applications.
8
Control by 1-Wire Controller / 1-Wire Gateway
The 1-Wire interface of the 1-Wire temperature sensor Pro is controlled by standard commands for the
device DS18B20. The 1-Wire Controller / 1-Wire Gateway has already stored a suitable formula for the
conversion of the raw data of the 1-Wire block. It is not necessary to assign an OWD number.
8.1
Data output 1-Wire Controller / 1-Wire Gateway
For the ESERA-Automation 1-Wire temperature sensor Pro, the following data are output. If you divide
the value by 100, you get the data with two decimal places.
Data output:
1_EVT|10:29:35
1_OWD1|2401 => Controller No._device No._data record|temperature (°C) example: 24,01 °C
