Art. No. 11325
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change.
ESERA GmbH, ESERA-Automation 2020
www.esera.de
11325 V2.0 R1.0 Manual
Page 1 of 8
User Guide
1-Wire Controller 1 Bluetooth
1-Wire Controller for autonomous communication and updating of the
1-Wire network.
Fast readout of all 1-Wire devices in
1-2 seconds cycle
Cyclic output of the prepared 1-Wire data in plain text
Data logging when communication to the control system/host system
is interrupted (option)
Power supply for 1-Wire network
Designed for small to large 1-Wire networks
DIN rail housing for control cabinet installation
Wide supply voltage range
Management of all ESERA-Automation and many standard 1-Wire
modules
1
Introduction
Before you start to install the 1-Wire Controller 1 and put the device into
operation, please read this operating manual through to the end,
especially the section on safety instructions.
2
Product Description
Self-sufficient management
The 1-Wire Controller 1 is designed for the autonomous management of a 1-Wire network. You no longer
need to worry about 1-Wire commands or formulas for evaluating sensor data. The controller independently
scans the 1-Wire network for devices (sensors and actuators) and, depending on the device found, outputs
the corresponding data in plain text.
Formatted data output
The 1-Wire Controller 1 provides the sensor and actuator data ready prepared, e.g. for temperature sensors
in C°, cyclically off. Only one division by 100 is necessary.
In addition, the article number for ESERA modules can be entered, the calculation and output is adapted to
the function of the module.
Designed for all 1-Wire networks
The 1-Wire interface of the 1-Wire Controller 1 is specially designed to safely operate from small to very
large 1-Wire networks with long cable runs. 1-Wire sensors can be operated simultaneously in parasitic or
normal mode.
The currently strongest 1-Wire interface for maximum data security, even for complex network structures,
has been installed.
System time / real time clock
You do not have a real-time clock with battery buffering in your system? No problem, the 1-Wire controller
gladly provides the time with date. A real-time clock with battery buffering is integrated.
Power supply
For power supply, the 1-Wire Controller 1 has a wide range input of 9 - 30VDC and is therefore equally
suitable for 12V and industry standard 24VDC supplies.
Suitable DIN rail or plug-in power supplies can be found in our webshop.
