Art. No. 11320
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA-Automation or E-Service GmbH. Errors and technical modification subject to change.
ESERA-Automation, E-Service GmbH 2020
www.esera.de
11320 V1.0 R1.0 Manual
Page 5 of 8
Connection example with iButton reader unit
9
Software
Data interface ESERA ASCII
textprotocol
You configure the Ethernet interface
with the help of the Windows ESERA
program "Config Tool 3". This
program can be found in the
download area of the ESERA online
shop.
10
Configuration and
Communication with
1-Wire Controller 1
The 1-Wire Controller 1 has
extensive configuration and
formatting options that can be read
and operated with the
ESERA "Config Tool 3".
Since the communication between
the 1-wire controller 1 and the
Config tool 3 takes place via the
open ESERA ASCII text protocol, you can also use any terminal program to
(e.g. Hercules or Putty) exchange data with the 1-Wire Controller 1 via UDP / TCPIP and perform the
configuration.
Details on the communication commands can be found in the document "Programmer's Manual", which is
available in the download area of the ESERA online shop and within Config-Tool 3.
