background image

 

 

 

All rights reserved. Reproduction as well as electronic duplication of this user manual, complete or in part, requires the written consent of 
ESERA-Automation or E-Service GmbH. Errors and technical modification subject to change.

 



ESERA-Automation, E-Service GmbH 2019 

www.esera.de 

11233 V1.0 R1.1 Manual 

           Page 7 of 7 

Art. No. 11233 

17 

Trademarks 

All mentioned designations, logos, names and trademarks (including those which are not explicitly marked) are trademarks, 
registered trademarks or other copyright or trademark or title legally protected designations of their respective owners and are 
hereby recognized as such by us. The mention of these designations, logos, names and trademarks is made for identification 
purposes only and does not represent a claim any kind on the part of ESERA-Automation, Andreas Geisler on these 
designations, logos, names and trademarks. Moreover, from their appearance at ESERA-Automation webpages it cannot be 
concluded that designations, logos and names are free of commercial property rights. 
ESERA is a registered trademark of E-Service GmbH. 
 

18 

 Contact 

ESERA-Automation 
E-Service GmbH 
Adelindastrasse 20 
87600 Kaufbeuren 
Tel.: +49 8341 999 80-0 
Fax: +49 8341 999 80-10 

www.esera.de

 

[email protected]

 

WEEE-Nummer: DE30249510

 

 

Summary of Contents for 11233








Reviews: