esera automation 11112 User Manual Download Page 5

 

Art. No. 11112  

 

 

All rights reserved. Reproduction as well as electronic duplication of this guide, complete or in part, requires the written consent of ESERA-
Automation or E-Service GmbH. Errors and technical modification subject to change. 



ESERA-Automation, E-Service GmbH 2019 

www.esera.de 

11112 V1.0 R1.0 Manual 

Page 5 of 5 

 

After installing the required tests according to BGV A3 / Betriebssicherheitsverordnung must be performed. 

 

17 

Warranty 

ESERA-Automation (E-SERVICE GmbH) guarantees that the goods sold at the time of transfer of risk to be free from 
material and workmanship defects and have the contractually assured characteristics. The statutory warranty period of two 
years begins from date of invoice. The warranty does not extend to the normal operational wear and normal wear and tear. 
Customer claims for damages, for example, for non-performance, fault in contracting, breach of secondary contractual 
obligations, consequential damages, damages resulting from unauthorized usage and other legal grounds are excluded. 
Excepting to this, ESERA-Automation accepts liability for the absence of a guaranteed quality resulting from intent or gross 
negligence. Claims made under the Product Liability Act are not affected. 
 
If defects occur for which the ESERA-Automation is responsible, and in the case of replacement goods, the replacement is 
faulty, the buyer has the right to have the original purchase price refunded or a reduction of the purchase price. ESERA-
Automation accepts liability neither for the constant and uninterrupted availability of the ESERA-Automation or for technical 
or electronic errors in the online offer. 
  
We develop our products further and we reserve the right to make changes and improvements to any of the products 
described in this documentation without prior notice. If you need documentation or information about older product versions, 
contact us by email a

[email protected]

 

 

18 

Trademarks 

All mentioned designations, logos, names and trademarks (including those which are not explicitly marked) are trademarks, 
registered trademarks or other copyright or trademarks or titles or legally protected designations of their respective owners 
and are hereby expressly recognized as such by us. The mention of these designations, logos, names and trademarks is 
made for identification purposes only and does not represent a claim of any kind on the part of ESERA-Automation, E-
Service GmbH on these designations, logos, names and trademarks. Moreover, from their appearance on ESERA-
Automation webpages it cannot be concluded that designations, logos, names and trademarks are free of commercial 
property rights. 
ESERA is a registered trademark of E-Service GmbH. 
 

19 

Contact 

ESERA-Automation, E-Service GmbH 
Adelindastrasse 20 
87600 Kaufbeuren 
GERMANY 
Tel.: +49 8341 999 80-0

 

Fax: +49 8341 999 80-10

 

www.esera.de

 

[email protected]

 

WEEE-Number: DE30249510

 

Summary of Contents for 11112






Reviews: