7 PLACING THE BALLAST
2 PLACE STANDARD BALLAST (3x4 kg.)
Place the standard ballast (3x4 kg.) in the units on the high
base. Place 1st ballast stone against the ridge.
1 PLACING THE BALLAST (GENERAL)
NB:
The installation drawing is the guideline for the bal
-
last positions. Using the calculator, the ballast positions
are determined. Place the ballast at the points indicated
by the calculator.
07
3 PLACE OPTIONAL BALLAST (5x4 kg.)
Tilt the ballast bracket at
an angle in the unit on
the high base.
Tilt the ballast bracket back into
the module.
Slide the bracket against the
high base and then click the
bracket into the long edge!
Place the ballast (3x4 kg.)
in the ballast track and the
other ballast (2x4 kg.) in the
module.
4
Click!
4 PLACE THE BALLAST IN POSITION ON THE BALLAST
BRACKET AT THE POSITION OF A STABILIZER
NB:
If there is a wire tray, there is only
room for 2 stones, instead of 3 stones, in
the ballast area. Then place this 3rd stone
in the unit on the other side of the high
base.
