Software
BAUD
setting of the transfer rate in [baud]
permissible values: 75, 110, 135, 150, 200, 300, 600,
1050, 1200, 1800, 2000, 2400,
4800, 7200, 9600, 19200, 38400
BUFFERLENGTH
number of characters buffered by the ASIO driver at
interrupt level, e.g. select small for USER, select
big for BINARY
permissible values: 16, 32, 64, 128, 256
CLEAR
(command) reset of the interrupt buffer
RESET
(command) base initialization of the channel
FORCE_BREAK (command) transmit BREAK signal on TxD line, necessary
e.g. at several SIEMENS protocols
STATUS
(command) reset of the parameter channel STATUS
Attention:
If at GET or PUT an error occurred,
following instruction are necessary in PEARL:
CLOSE input_kanal;
returns a faulty communica-
or
tion element (CE), by
CLOSE output_kanal;
ST(...) /= 0;
back to the opera-
ting system
GET FROM input_kanal BY LIST;
resets the status of the input
channel in the run-time system
or
(
ST(...) := 0;
)
PUT TO output_kanal BY LIST;
resets the status of the output
channel in the run-time system
(
ST(...) := 0;
)
VME-ASIO16 Rev. 1.7
37
Summary of Contents for VME - ASIO16
