ESD EPPC-T10, Hardware Manual, Page: 31 / 37

Connector Assignments
8.2 Ethernet ETH1 - 3 (X1300, X1400, X1500)
Connector type: RJ45- connector, in the case, upper side
Pin Position:
Position Signal
1
MDI 0 +
2
MDI 0 -
3
MDI 1 +
4
MDI 2 +
5
MDI 2 -
6
MDI 1 -
7
MDI 3 +
8
MDI 3 -
NOTICE
Cables of category CAT5e or higher have to be used to grant the function in networks with
1000 Mbit/s. esd grants the EC conformity of the product if the wiring is carried out with
shielded twisted pair cables of category CAT5e or higher.
EPPC-T10 Hardware Manual • Doc. No.: I.2007.21 / Rev. 1.1 Page 31 of 37
1 2 3 4 5 6 7 8