Technical Data
2.9 Ethernet Interfaces
Number
3
Standard
IEEE 802.3, 10Base-T, 100Base-TX, 1000Base-T
Bit rate
10/100/1000 MBit/s
Controller
Integrated in the CPU
Electrical isolation
Transformer, integrated in the RJ45 socket
Connector
RJ45 sockets with integrated Link and Activity LEDs
NOTICE
Cables of category CAT5e or higher have to be used to grant the function in networks with
1000 Mbit/s. esd grants the EC conformity of the product if the wiring is carried out with
shielded twisted pair cables of category CAT5e or higher.
2.10 Serial Interface
Number
1 asynchronous serial interface
Controller
integrated in CPU - 16550 compatible
Bit rate
Value range:
9600 Baud ... 115200 Baud
Default setting:
9600 Baud, 8 Bit, No Parity 1 Stop-Bit
Physical interface
RS232 with RxD, TxD, RTS, CTS
Software
Standard operating system driver
Connector
Serial 1: RJ-45 connector
NOTICE
For the serial interface shielded cables have to be used.
esd grants the EC conformity of the product if the wiring is carried out with a shielded
cable with a maximum wire length of 30 m.
2.11 Terminal Interface
Number
1 asynchronous serial interface
Controller
integrated in CPU - 16550 compatible
Bit rate
Value range:
9600 Baud ... 115200 Baud
Default setting:
115200 Baud, 8 Bit, No Parity 1 Stop-Bit
Physical interface
TTL with RxD, TxD, converted with FTDI to USB 2.0
USB bit rate
Max. 480 MBit/s
Software
FTDI driver, see “Configuration and Console Access”on page 26
Connector
Mini-USB connector type-B
Page 14 of 37
Hardware Manual • Doc. No.: I.2007.21 / Rev. 1.1
EPPC-T10