
Software
7. Software
7.1 GSD File
;======================================================================================================
; (c) esd electronic system design GmbH Hannover
;
; PROFIBUS-DP Geraetestammdatei
; Version: 1.30
;
; Autor: Ulrich Hartmann
; Erstellungsdatum: V1.1 18.10.2005 uh
; Aenderungen: 18.10.2005 Module Names for consistent outputs corrected
; 01.07.2007 Input 10 Byte Life Counter added
; 15.08.2011 length restricted to 240 bytes
; 23.08.2011 length restriction reversed to 244 bytes
;======================================================================================================
; Art des Parameters
; (M) Mandatory (zwingend notwendig)
; (O) Optional (zusõtzlich m÷glich)
; (D) Optional mit Default=0 falls nicht vorhanden
; (G) mindestens einer aus der Gruppe passend zur entsprechenden Baudrate
#PROFIBUS_DP
;--- Kapitel 2.3.2 Allgemeine DP-Schluesselwoerter ---
GSD_Revision
= 2
; (M ab GSD_Revision 1) (Unsigned8)
Vendor_Name
= "esd"
; (M) Herstellername (Visible-String 32)
Model_Name
= "CPCI-DP-2"
; (M) Herstellerbezeichnung des DP-Geraetes (Visible-String 32)
Revision
= "V1.0"
; (M) Ausgabestand des DP-Geraetes (Visible-String 32)
Revision_Number
= 1
; (M ab GSD_Revision 1) (Unsigned8 (1 bis 63)) (1234)
Ident_Number
= 2572
; (M) Gerõtetyp des DP-Gerõtes (Unsigned16)
Protocol_Ident
= 0
; (M) Protokollkennung des DP-Geraetes 0: Profibus-DP (Unsigned8)
Station_Type
= 0
; (M) DP-Geraetetyp 0: DP-Slave (Unsigned8)
FMS_supp
= 0
; (D) kein FMS/DP-Mischgeraet (Boolean)
Hardware_Release
= "V1.0"
; (M) Hardware Ausgabestand des DP-Geraetes (Visible-String 32)
Software_Release
= "V1.0"
; (M) Software Ausgabestand des DP-Geraetes (Visible-String 32)
9.6_supp
= 1
; (G) 9,6 kBaud wird unterstuetzt
19.2_supp
= 1
; (G) 19,2 kBaud wird unterstuetzt
;31.25_supp
= 1
; fuer Gateway CAN-CBM-DP nicht moeglich (1234)
45.45_supp
= 1
; (G ab GSD_Revision 2) 45,45 kBaud wird unterstuetzt
93.75_supp
= 1
; (G) 93,75 kBaud wird unterstuetzt
187.5_supp
= 1
; (G) 187,5 kBaud wird unterstuetzt
500_supp
= 1
; (G) 500 kBaud wird unterstuetzt
1.5M_supp
= 1
; (G) 1,5 MBaud wird unterstuetzt
3M_supp
= 1
; (G ab GSD_Revision 1) 3 MBaud wird unterstuetzt
6M_supp
= 1
; (G ab GSD_Revision 1) 6 MBaud wird unterstuetzt
12M_supp
= 1
; (G ab GSD_Revision 1) 12 MBaud wird unterstuetzt
MaxTsdr_9.6
= 60
; (G)
MaxTsdr_19.2
= 60
; (G)
;MaxTsdr_31.25
= 15
; fuer Gateway CAN-CBM-DP nicht moeglich (1234)
MaxTsdr_45.45
= 60
; (G ab GSD_Revision 2)
MaxTsdr_93.75
= 60
; (G)
MaxTsdr_187.5
= 60
; (G)
MaxTsdr_500
= 100
; (G)
MaxTsdr_1.5M
= 150
; (G)
MaxTsdr_3M
= 250
; (G ab GSD_Revision 1)
MaxTsdr_6M
= 450
; (G ab GSD_Revision 1)
MaxTsdr_12M
= 800
; (G ab GSD_Revision 1)
Redundancy
= 0
; (D) keine redundante Uebertragungstechnik
Repeater_Ctrl_Sig
= 0
; (D) RTS-Signalpegel (CNTR-P) Pin 4 des 9pol. SUB-D
; 0: nicht vorhanden 1: RS 485 2: TTL
24V_Pins
= 0 ; (D) Bedeutung der 24V Pins des 9pol. SUB-D (Pin 7 24V; Pin 2 GND)
; 0: nicht angeschlossen 1: Input 2: Output
; Implementation_Type = "Visible-String" ; (1234)
Bitmap_Device
= "CDP200_N"
; (O ab GSD_Revision 1)
Bitmap_Diag
= "CDP200_D"
; (O ab GSD_Revision 1)
Bitmap_SF
= "CDP200_S"
; (O ab GSD_Revision 1)
;--- Kapitel 2.3.4 DP-Slave-bezogene Schluesselwoerter ---
Freeze_Mode_supp = 0 ; (D) Der Freeze-Mode wird nicht unterstuetzt
Sync_Mode_supp = 0 ; (D) Der Sync-Mode wird nicht unterstuetzt
Auto_Baud_supp = 1 ; (D) Die Automatische Baudratenerkennung wird unterstuetzt
Set_Slave_Add_supp = 0 ; (D) Die Slave-Adresse kann vom Master nicht gesetzt werden
Min_Slave_Intervall = 6 ; (M) Minimaler Abstand zwischen 2 DDLM_Data_Exchange-Aufrufen (xx * 100us)
Modular_Station = 1 ; (D) 0: Kompaktstation 1: Modulare Station
Max_Module = 244 ; (M falls modulare Station) Hoechstanzahl der Module einer Modularen Station
Max_Input_Len = 244 ; (M falls modulare Station) Hoechstlaenge der Eingangsdaten einer Modularen Station
Max_Output_Len = 244 ; (M falls modulare Station) Hoechstlaenge der Ausgangsdaten einer Modularen Station
Max_Data_Len = 350 ; (O nur falls modulare Station) Groesste Summe der Ein- und Ausgangsdaten einer
Modularen Station in Bytes
CPCI-DP-2S
Hardware Manual • Doc. No.: I.2322.21 / Rev. 1.2
Page 17 of 36