Hardware Installation
2.5.2.1 Connecting Power Supply and CAN Signals via CBX-InRailBus
To connect the power supply and the CAN-signals via the InRailBus, a terminal plug (order no.:
C.3000.02) is needed. The terminal plug is not included in delivery and must be ordered separately
(see order information).
Figure 10:
Mounting rail with InRailBus and terminal plug
Plug the terminal plug into the socket on the right of the mounting-rail bus connector of the
InRailBus, as described in Figure 10. Then connect the CAN interface and the power supply
voltage via the terminal plug.
Please pay attention to the notes on the connection of the power supply voltage on page 14.
CAN-CBX-CPU5201
Hardware Manual • Doc. No.: C.3071.21 / Rev. 1.5
Page 17 of 53
