Hardware-Manual • Doc.-No.: C.2844/6.21
/
Rev. 1.9
CAN-CBM-DP / DN-CBM-DP
Page 2 of 45
N O T E
The information in this document has been carefully checked and is believed to be entirely reliable.
esd makes no warranty of any kind with regard to the material in this document, and assumes no
responsibility for any errors that may appear in this document. In particular descriptions and
technical data specified in this document may not be constituted to be guaranteed product features in
any legal sense.
esd reserves the right to make changes without notice to this, or any of its products, to improve
reliability, performance or design.
All rights to this documentation are reserved by esd. Distribution to third parties and reproduction
of this document in any form, whole or in part, are subject to esd’s written approval.
© 2018 esd electronics gmbh, Hannover
esd electronics gmbh
Vahrenwalder Str. 207
30165 Hannover
Germany
Phone:
+49-511-372 98-0
Fax:
+49-511-372 98-68
E-mail:
Internet:
www.esd.eu
This manual contains important information and instructions on safe and efficient
handling of the module. Carefully read this manual before commencing any work and
follow the instructions.
The manual is a product component, please retain it for future use.
Trademark Notices
CiA® and CANopen® are registered community trademarks of CAN in Automation e.V.
PROFIBUS is a registered trademark of PROFIBUS Nutzerorganisation e.V..
DeviceNet
TM
is a trademark of the Open DeviceNet Vendor Association, Inc (ODVA).
All other trademarks, product names, company names or company logos used in this manual are reserved by their
respective owners.