Technical Data
3. Technical Data
3.1 General Technical Data
Power supply
voltage
supplied by PCI bus,
nominal voltage:
5 V ±5%,
3.3 V ±5%,
typical current consumption for 2x CAN (max., at 20°C):
0,62 A at 3,3 V
0,13 A at 5 V
Connectors
PCI bus
CAN0
CAN1
- card edge (X100)
- DSUB9/male (X1000)
- DSUB9/male ( X1010)
The following connectors are only equipped for programming and service:
debug interface
serial interface (TTL)
- 10-pole SMD female con. (X720)
- 6-pole post connector (X710)
CAN-PCI/405-4 only:
Connector to adapter board for CAN net 2 and CAN net 3
- 10-pole post connector (X1100)
The following connectors are on the adapter board
CAN2
CAN3
- DSUB9/male (P130)
- DSUB9/male (P170)
Connector on the adapter board for the connection of the
CAN-PCI/405-4 via ribbon cable
- 10-pin post connector ( X100)
Temperature
range
0...50 °C ambient temperature
Humidity
max. 90%, non-condensing
Dimensions
164.64 mm x 106.68 mm (without slot cover panel and CAN connectors)
Weight
<200 g
Table 1:
General data of the module
3.2 Microprocessor and Memory
CPU
PowerPC 405GP, 200 MHz, 32 bit
Flash
1 MB Flash
SDRAM
4 M x 32 bit SDRAM (16 Mbyte)
Table 2:
Microprocessor and memory
Page 12 of 28
Hardware Manual • Doc. No.: C.2023.21 / Rev. 1.3
CAN-PCI/405
