Hardware Installation
9.
Switch on the computer and the peripheral devices.
10. Set the interface properties in your operating system. Refer to the documentation of the
operating system.
Note!
Due to the integrated Hot-Swap controller the AMC-PCIe-Carrier supports 'Hot-Insert'
and 'Hot-Remove' of the AMC boards.
Please note that common PCs do not support the 'Hot-Insert' and 'Hot-Remove'
capability. Please inform yourself about your PC's capability, if you want to install or
remove an AMC board during operation.
If your PC does not support the 'Hot-Insert' and 'Hot-Remove' capability the AMC board
may only be inserted or removed if the PC is disconnected from mains as described in
point 3.
AMC-PCIe-Carrier
Hardware Manual • Doc. No.: U.1003.21 / Rev. 1.1
Page 11 of 16