![background image](http://html1.mh-extra.com/html/escort/srx-corvette-c-6/srx-corvette-c-6_installation-tips-manual_2426335007.webp)
White
Orange
Blue
No wire
Step 4: Place modular plug with cable
into location as shown. Squeeze
handles together until they stop.
Step 1: Cut modular cable in crimp tool as shown.
Yellow
Red
Green
Blue
Crimping Too: Mouser Part Number 382-2094C
Mouser Electronics, Inc. Phone 800.346.6873
1000 North Main St. www.mouser.com
Mansfield, TX 76063
Important tips for cutting modular cables and crimping modular jacks
Step 3B: Color sequence of wires
placed in modular plug for Radar
receiver.
Yellow
Red
No wire
Blue
Step 3C: Color sequence of wires
placed in modular plug for Concealed
display.
Step 2: Place cable in strip part of crimp tool and rotate
wire in a circular direction to remove outside jacket. Be sure
not to knick the insulation on the separate strand of wire.
Step 3A: Color sequence of wires placed in modular plug for
front shifters, rear shifters, and display module.
Modular Connector Digi-Key PN A9091-ND 4 Pos / 4 Cont
Digi-Key Corporation Phone 800.344.4539
701 Brooks Ave South www.digikey.com
Thief River Falls, MN 56701