13
Details of EZ Programming Options
City Mode Sensitivity
City STD
(Standar d)
In this setting, when you put Passport in
the City mode, X-band sensitivity is signifi-
cantly reduced, to reduce annoyance from
X-band intrusion alarms and motion sen-
sors. (factory default)
City LoX
(Lo w X band sensitivity)
In this setting, when you put Passport in
the City mode, X-band sensitivity is re-
duced more than the standard setting. This
will reduce X band alarms from other
sources even further, but also significantly
reduces range to X band traffic radar.
City NoX
(No X band sensitivity)
In this setting, when you put Passport in
the City mode, Passport will not respond
to any X band signals. WARNING: Only
choose this setting if you are absolutely
certain that there are no X band traffic
radar units where you drive.
AutoMute
aMute ON
(autom ute on)
In this setting, Passport’s audio alerts will
initially be at the volume you set, but after
a few seconds, Passport will automatically
reduce the volume level, to keep you in-
formed, but not annoyed. (factory default)
aMuteOFF
(autom ute of f)
With AutoMute off, Passport’s audio alerts
will remain at the volume you set for the
duration of the radar encounter.
Audio Tones
Tone STD
(Standar d tones)
This setting uses more pleasing tones. (fac-
tory default)
ToneLOUD
(Loud tones)
This setting uses tones that are more pierc-
ing, and easier to hear in a louder vehicle.
