4.0 Mounting Instructions
The Model 3117 Double-Ridged Waveguide Horn Antenna includes these
components:
•
Double-Ridged Waveguide Horn
•
Mounting bracket with two ¼ inch x 20 threaded connectors
•
Stinger mount for centerline rotation
Stinger
mount
Threaded
mounting
stud
Polarization
orientation
stud
Threaded
connector
Threaded
connector
Type N
connector
U-shaped mounting
bracket
Polarization orientation stud
The Model 3117 antenna can be mounted in three different configurations:
•
With the mounting bracket
•
With the stinger mount and special boom (for centerline polarization)
•
With a clamp block
4.1 Using the Mounting Bracket
The U-shaped mounting bracket features a ¼ inch x 20 threaded connector at
one end of the bracket, and another ¼ inch x 20 threaded connector at the other
end. This design allows mounting from either end of the bracket. Because the
threaded connectors are different distances from the center of the bracket,
flipping the bracket results in one end longer than the other, constructed to
support a variety of mounting scenarios.
Mounting Instructions
|
13
Summary of Contents for ETS-Lindgren 3117
