The ES50M-65N is intended for use as an electrical transfer switch to automatically switch multiple
sources (from one to another), i.e. switching from shoreline to generator power.
The ES50M-65N is primarily designed for installation in conjunction with a generator
having a rated output no larger than 12KW and an external power cord having a rated output no
larger than 2 pole, 240VAC, 50A, 1PH, 60HZ .
CONTACTORS
:
3 Pole N.O. 240 VAC 50Amps/Pole
PHYSICAL SIZE
:
8 1/2” x 8 1/2” x 4 1/2”
COIL
:
110VAC (60Hz, Inrush current - 77 Watts, Sealed - 4.0 Watts)
KNOCKOUTS
:
Assorted
TIME DELAY
:
Custom time delay, 30 seconds nominal. Includes generator low voltage monitoring
WEIGHT:
8.5 lbs
CAUTIONS:
** INSTALL VERTICALLY OR HORIZONTALLY IN A DRY,
ACCESSIBLE AREA.
** CONSULT FACTORY BEFORE DRILLING METAL CASE.
** KEEP COVERED EXCEPT DURING WIRING AS
CONTACTORS ARE SENSITVE TO DUST AND DEBRIS.
** WHEN HI-POTTING COACH, DISCONNECT ES50M-65N OR
HI-POT ON LOAD SIDE OF SWITCH. THIS UNIT HAS BEEN
HI-POTTED TO UL STANDARDS AT THE FACTORY.
WARRANTY:
The manufacturer
warrants that this product shall be free from defects in
material and workmanship for one year (twelve months) from date of purchase or eighteen months
after date of manufacture, whichever is less. If, after our inspection, a defect is revealed, the unit will
be repaired and returned, at our discretion. We will accept up to 1/2 hour (30 minutes) labor for the
unit to be changed out or $18.00, whichever is less. This warranty shall not apply to any product that
shows evidence of neglect, misuse, improper installation, or that has been repaired or altered by any
other party other than this company. Proof of purchase may be required.
ES50M-65N INSTALLATION DIAGRAM
WHITE
BLACK
RED
WHITE
BLACK
RED
WHITE
BLACK
RED
HOT TWO
HOT ONE
NEUTRAL
HOT ONE
HOT TWO
NEUTRAL
T1
T3
T2
L3
L2
L1
L6
L5
L4
T5
T4
T6
