1.800.352.9852 •
•
www.esco.net
3
WARNING
•
Read and understand all instructions. Failure to comply could result in death, bodily inju-
ry and/or damage to equipment.
•
Do not allow children or untrained individuals to use this product.
•
Always wear ANSI and OSHA standard Personal Protective Equipment when using this
product. Not wearing eye wear, non
-
slip shoes or hearing protection may result in injury.
•
Do not modify or use non
-
factory authorized parts on this product.
•
Do not inflator or over flate the tire.
•
Keep bystanders 20 feet away when tank is charged.
•
Do not use this product for any other purpose than what it is designed for.
•
Do not store or transport charged bead seating tanks. Discharge the air tank when it is
not in use.
•
Always follow OSHA 1910.77 standard* while using this product.
•
Always visually inspect the product before use for damage. Do not use product if dam-
aged, altered, or in poor condition. Contact our technical service department with any
questions or issues by calling 800
-
352
-
9852.
CYCLONE BEAD SEATING TANK—
5
GALLON #20380
EYE PROTECTION
MUST BE WORN
HEARING PROTECTION
MUST BE WORN
RESTRAINING DEVICE
MUST BE USED DURING
DE/INFLATION
GENERAL SAFETY RULES
*OSHA 1910.177 standard
1910.177(d)(1)
The employer shall furnish a restraining device for inflating tires on multi
-
piece wheels.
1910.177(d)(2)
The employer shall provide a restraining device or barrier for inflating tires on single piece wheels unless the rim wheel will be bolted onto a vehicle during
inflation.
1910.177(d)(3)
Restraining devices and barriers shall comply with the following requirements:
1910.177(d)(3)(i)
Each restraining device or barrier shall have the capacity to withstand the maximum force that would be transferred to it during a rim wheel separation occur-
ring at 150 percent of the maximum tire specification pressure for the type of rim wheel being serviced.
1910.177(d)(3)(ii)
Restraining devices and barriers shall be capable of preventing the rim wheel components from being thrown outside or beyond the device or barrier for any
rim wheel positioned within or behind the device;
1910.177(d)(3)(iii)
Restraining devices and barriers shall be visually inspected prior to each day's use and after any separation of the rim wheel components or sudden release of
contained air. Any restraining device or barrier exhibiting damage such as the following defects shall be immediately removed from service.
