![background image](http://html1.mh-extra.com/html/esco/aeris-bg384/aeris-bg384_service-manual_2426102007.webp)
Besides, a multi-channel temperature acquisition device is needed for temperature uniformity and
accuracy testing.
Chapter 2 Service Procedures
2.1 Assemble and disassemble the main body
2.1.1
Assemble procedure
•
Assemble the PCB board, power supply and fan with the stainless steel stand.
Put the whole part in the bottom casing and make sure the part is fastened by the
buckle of the bottom casing. Refer to Fig. 1
Fig. 1
•
Tighten the four screws to fix the rubber feet with bottom casing. Refer to Fig. 2
Fig 2
2.1.2
Disassemble procedure
•
Remove the screws as showed in the red square. Take down the left and right
board. Refer to Fig 3, and then you can see the whole main body structure
without the cover(Fig 4)
Fig 3