1.800.352.9852 •
•
www.esco.net
3
WARNING
•
To avoid personal injury or property damage, please follow all safety precautions. ESCO cannot be responsible for injury or damage resulting
from unsafe and incorrect products use or system operation, or lack of maintenance.
•
Do not allow children or untrained individuals to use this product. Operator of this product must be trained and familiar with the correct use of
hydraulic equipment.
•
Always wear ANSI and OSHA standard Personal Protective Equipment when using this product. Not wearing eye wear, non
-
slip shoes or hearing
protection may result in injury.
•
Do not modify or use non
-
factory authorized parts on this product.
•
Do not use hoses in system exceeding 10,000 PSI (700 BAR)
•
Never use hydraulic hose to move or carry hydraulic components.
•
Keep hydraulic equipment away from flames and heat
•
Only use compatible high quality hydraulic fluids
•
Only connect coupler fittings with quick disconnects. Never use tools to tighten coupler.
•
Never lift a load more than the capacity of the cylinders, overloading causes equipment failure and possible personal injury.
•
The operating pressure of cylinders are designed for a max pressure of 10,000 psi (700 bar), please do not use a pump or relief valve with a
higher pressure rating to connect the cylinder. Higher pump or relief valve may cause equipment failure and possible personal injury.
•
Please install pressure gauges in the system to watch the operating pressure. The gauge must have the same pressure rating as the pump and
cylinder(s). The wrong gauges may result in personal injury. Always use an air pressure reducer or regulator with filter in hydraulic system.
•
Please keep the cylinder clean all the time.
•
Do not attempt to disconnect coupler while system is under pressure.
•
Do not put poor
-
balanced or off
-
center loads on cylinders. The incorrect load or side loading can result in equipment failure and possible personal
injury.
•
When the cylinder is not in use, please keep the piston rod fully return, remove hose and use rubber cap to recover the coupler(s). If you use
collar threads, please use the thread protector to recover the collar threads.
•
Please use hydraulic equipment in normal temperature, do not use equipment in temperatures of 65
℃ (150℃)
or higher. Overheating will soften
seals and weakens hose materials, resulting in oil leaking or other equipment failure.
•
Always follow OSHA 1910.77 standard* while using this product.
•
Please carefully inspect cylinders, couplers and hose before use hydraulic equipment, if you find any damage on the couplers, hose, port threads
and cylinders, please contact our technical service department with any questions or issues by calling 800
-
352
-
9852.
EYE PROTECTION
MUST BE WORN
HEARING PROTECTION
MUST BE WORN
GENERAL SAFETY RULES
Warning:
PLEASE READ AND FOLLOW THIS INSTRUCTION BEFORE YOU USE ESCO CYLINDERS.
STAK
-
ABLE HYDRAULIC RAM KIT #10316
