6
EMCenter Modular RF Platform
•
The EMCenter manual (PN 399342) can be found at ets-lindgren.com.
Optional Items
•
EMQuest EMQ-100 Antenna Measurement Software (Standard Version)
•
EMQuest EMQ-100 Lite Antenna Pattern Measurement Software
ETS-Lindgren Product Information Bulletin
See the ETS-Lindgren
Product Information Bulletin
included with your
shipment for the following:
•
Safety, regulatory, and other product marking information
•
Steps to receive your shipment
•
Steps to return a component for service
•
ETS-Lindgren calibration service
•
ETS-Lindgren contact information
Before performing any
maintenance, read
the safety information
in the ETS-Lindgren
Product Information
Bulletin
included with
your shipment.
WARRANTY
Only qualified
personnel should
operate (or service)
this equipment.
If you have any
questions concerning
maintenance, contact
ETS-Lindgren Technical
Support. Warranty may
be voided if housing is
opened.
Note:
See the ETS-Lindgren
Product Information
Bulletin
for safety,
regulatory, and other
product marking
information.
INTRODUCTION
ETS-Lindgren’s 2303 Positioner is designed to perform automated 3-dimensional
pattern measurements. The positioner includes vertical support columns that will
accommodate equipment under test (EUT) up to 25 kg (55 lb).
The positioner is equipped with four motors (one Azimuth, three elevation),
208/230 VAC 50 or 60 Hz single phase. An IEC receptacle is the standard power
input. The IEC rocker switch illuminates red when in the ON position. Current draw
is fused at 6.3 A maximum. The motor drive, in conjunction with the provided
command set, controls the movement of the unit. 10 M (32.8 ft) fiber-optic cable
provided.
Standard Configuration
Model 2303 Positioner Assembly
•
Single-phase electric drive (208/230 VAC 50/60 Hz)
•
Variable-speed drive
•
708043 Ethernet to Fiber Converter
•
705347-10 10.0 M (32.8 ft) Fiber-Optic Cable (2)
Note:
ETS-Lindgren may
substitute a similar
part or new part
number with the same
functionality for another
part/part number.
Contact ETS-Lindgren
for questions about part
numbers and ordering
parts.
