MIRI
®
II-12 Multiroom IVF incubators User Manual Rev. 4.0
13
A visual inspection should be done if there is any damage. If no damage is found, the MIRI
®
II-12 multiroom IVF incubator can be prepared for transport.
These labels should be glued on the box:
•
Label with the marked packing date
•
Label with the product name and serial number
5.2 Storage and operation environment requirements
5.2.1 Storage requirements
The device may only be store under the following conditions:
•
The unit can be in storage for one year. If stored longer than one year, the unit must
be returned to the manufacturer for a new release test
•
The unit can be stored at temperatures between -20 °C and + 50 °C
•
Keep away from direct sunlight
•
Caution: consult the accompanying documents for important safety-related
information such as warnings and precautions that cannot be presented on the
device itself for various reasons
•
Do not use if the packing material is damaged
•
Keep dry
5.2.2 Operation environment requirements
The device may only be used under the following conditions:
•
Environmental temperatures below 30 °C
•
Away from direct sunlight
•
Kept dry
•
For indoor use only
5.3 Disposal
Information on handling of the unit as per the WEEE Directive (Waste Electrical and Elec-
tronic Equipment).
The device may have been used for treating and processing infectious substances.
Therefore, the device and device components may be contaminated. Prior to disposal,
the whole device must be disinfected or decontaminated.
The unit contains reusable materials. All components (except for the VOC/HEPA and HEPA
filters) can be discarded as electrical waste after cleaning and disinfection.
