Escient FireBall SE-80, Startup Manual

Page: 147 / 294

ADDING YOUR OWN COVER ART WD012-1-2
12/22/2003
6325 Digital Way Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com
Transferring Images to Your FireBall
Provided that you have met the above requirements, you are ready to transfer your images to
your FireBall.
Determine your FireBall’s IP Address
Every device on your network must have an IP Address so that the devices know how to locate
and connect to each other. Follow these steps to determine the IP Address of your FireBall.
1. Power On Your FireBall
2. Press the SETUP key on the remote
3. Navigate and select the Utilities menu
4. Navigate and select the System Information menu
5. Locate the IP Address of your FireBall and write it down. This information is located at
the bottom right of the System Information screen, under “Ethernet”. The IP Address will
have 4 numbers separated by periods. It will look something like this:
192.168.1.100
6. Press SETUP again to exit from Setup.
System Information Screen
Connecting your PC to your FireBall
You will make an “FTP” connection from your PC (or Mac) to your FireBall. “FTP” stands for
“File Transmission Protocol” and is a standard for transferring files between networked
devices.
Using your FTP client program on your PC or Mac, make a new connection and enter your
FireBall’s IP address as the
host name .
If you are transferring DVD cover art, use “ movies ” for the user name and password.
If you are transferring CD cover art, use “ music ” for the user name and password.