FireBall SE Advanced Users Guide WD049-1-1
9/23/2005
Page 29 of 46
6640 Intech Blvd. Suite 250 Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com
Controlling Other Components
Code Select Mode
Follow these steps to control a device on the TV, CBL, RCV, and DVD keys:
(For this example, we’ll program the TV key)
1. Turn on the TV using the TV’s front panel.
2. Press the TV key on the FireBall remote.
3. Press and hold the CODE SET key until the LED blinks twice, then release.
4. Locate the Manufacturer’s Code for your brand of TV (see the end of this chapter)
5. Enter the first four-digit code for your TV using the numeric keys on the FireBall remote.
6. The LED on the remote should blink twice. If the LED did not blink twice, then repeat
steps 2 through 5.
7. Aim the Remote at the TV and press PWR key once. It should turn off. If it does not
respond, repeat steps 2-5, trying each code for your brand until you find one that works.
Repeat steps 1 through 7 for each component you want the Remote to control on the TV, CBL,
RCV, and DVD keys.
Code Scan Mode
If your device does not respond to the Remote after trying all codes listed for your brand, or if
your brand is not listed at all, try scanning for your code.
Follow these steps to scan for a code for your TV:
1. On the Remote, press TV once.
2. Press and hold CODE SET until the LED blinks twice, then release CODE SET.
3. Enter 9 - 9 - 1. The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate between pressing PWR and TV.
Stop when the TV turns off. NOTE: In the scan mode, the remote will send IR codes
from its library to the selected device, starting with the most popular code first.
5. hen you find a working code, press CODE SET once to lock in the code.
To search for the codes of your other components, repeat steps 1 through 5, but substitute the
appropriate key (TV, CBL, RCV, DVD) for the component that you are searching for.
Code Check Mode
If you set up the remote using the Code Scan Mode, you may need to find out which four-digit
code is operating your equipment.
Follow these steps to find which code is operating your TV:
1. Press the TV key.
2. Press and hold CODE SET until the LED blinks twice, then release CODE SET.
3. Enter 9 - 9 - 0. The LED will blink twice.
4. To view the code for the first digit, press 1 once. Wait 3 seconds, count the LED blinks
(e.g., 3 blinks = 3) NOTE: If a code digit is “0”, the LED will not blink.
5. Repeat step 4 three more times for remaining digits. Use 2 for the second digit, 3 for the
third digit, and 4 for the fourth digit.
Summary of Contents for FireBall SE-80
Page 1: ...SE 80 DIGITAL MUSIC MANAGER START UP GUIDE P N M32001 01A1 ...
Page 15: ......
Page 16: ...6 086 0 1 5 86 5 6 0 18 3 1 ...
Page 294: ......
