Eschenbach Scribolux, Operating Manual

Page: 9 / 44

- 9 -
Use
Place the standing magnifier on the reading
material so that the lens [a] points towards you.
Switch the lamp on by pressing the button [b].
Pressing the button again will switch off the
lamp. The lamp will switch off automatically
after 30 minutes to conserve battery power. If
you still require the lamp, you can simply switch
it back on.
Use the most comfortable distance between
your eye and standing magnifier. It is dependent
on the reading glasses being used and your
eyes’ adaptability.
Switch off the lamp when done.
Use with adapter
For a more convenient diagonal view, you can
use the scribolux with the supplied adapter.
Simply place the scribolux onto the adapter as
shown on p. 3 with the tips of the stand in the
adapter. Then press the back of the appliance
gently downwards.
Changing batteries
Open the battery compartment [c] as shown in
the figure on page 2 by pulling it upwards from
standing magnifier.
Now remove the exhausted batteries and insert
new batteries as shown in the diagram.
•
You need 3 batteries, type Mignon (AA/
LR6)/1.5V. Always insert three new batter-
ies of the same type. Note the position of
the respective positive pole (+).
The proper polarities are indicated in the battery
case.
Close the battery case by placing it on the
standing magnifier [d] and sliding it down until it
snaps tight.
Note
If you normally wear glasses, you do not need to
take them off. The standing magnifier is de-
signed to be used also in conjunction with your
ordinary reading glasses.