Eschenbach laboCOMFORT, User Manual

Page: 8 / 52

- 8 -
X laboCOMFORT may not be used while driving automobiles.
X Protect your laboCOMFORT from impacts and excessive heat.
Never lay your laboCOMFORT on a radiator or in direct sunlight.
X The product is a Class I medical device (non-sterile, without mea-
suring function) and complies with Regulation (EU) 2017/745.
For use of the product outside the EU member states, the respec-
tive country-specific directives must be observed.
Operating elements
1 Lens part
2 Magnifier case
3 Forehead support with air vents
4 Elastic strap with Velcro fastener
Adjusting the headband magnifier
The strap can be easily adapted to any head size by adjusting the Velcro
fasteners on each side of the strap. The forehead support has gaps so that air
can circulate. The magnifier case of the headband magnifier can be set to the
most comfortable position through various snap-in positions. This allows for
a comfortable head position. When the headband magnifier is not in use it
does not need to be taken off completely but can be simply swiveled up.
Exchanging the lens
To exchange the lens pull it down out of the frame of the magnifier case. A
different lens can then be snapped into the frame. Just make sure that the
curved surface of the lens is on the side away from the eye. The magnifica-
tion of the lens is stamped into the lens’ adapter. The headband magnifier
is available with various magnifications. There is a certain working distance
(distance between lens and viewed object) for each magnification that
should be kept to get an optimal image quality. Extra individual lenses can be
ordered by the following order numbers:
BDA_labo-comfort_2021_multi.indd 8 03.05.2021 22:43:22