background image

IMPORTANT SAFETY 

INSTRUCTIONS

THIS APPLIANCE IS INTENDED FOR HOUSEHOLD 

USE. WHEN USING ELECTRICAL APPLIANCES, BASIC 

SAFETY PRECAUTIONS SHOULD ALWAYS BE TAKEN, 

INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS 

BEFORE USING THIS 

MIRROR

DANGER

– 

TO REDUCE THE RISK OF 

ELECTRIC SHOCK: ALWAYS UNPLUG THIS FURNISHING 
FROM THE ELECTRICAL OUTLET BEFORE CLEANING

WARNING

 – 

TO REDUCE THE RISK 

OF BURNS, ELECTROCUTION, FIRE, OR INjURY TO 

PERSONS:

1. 

 

Read all instructions before using the 

appliance.

2.  To protect against electrical hazards, do not use 

while bathing or in the shower.

3.  Close supervision is necessary when any appliance 

is used by or near children or by invalids.

4.  Unplug the appliance from outlet when not in 

use and before cleaning.  Do not leave appliance 

unattended when it is plugged in.  Keep cord away 

from heated surfaces.

5.  Do not operate this appliance with a damaged 

cord or plug or if the appliance malfunctions or 

has been dropped or damaged in any manner.  

Return appliance to nearest service facility for 

examination, electrical or mechanical adjustment, 

or repair. No repairs should be attempted by the 

consumer.

6.  Use appliance only for intended use as described 

in this instruction book.  The use of attachments 

not recommended or sold by Conair may cause 

hazards.

7.  Do not use outdoors or operate where aerosol 

(spray) products are being used, or where oxygen 

is being administered.

8.  Be sure mirror is not in a position where it can 

reflect sunlight; reflected sunlight can cause fire.

9.  Do not use on a soft surface such as a bed, where  

openings may be blocked.

10. Turn switch to “OFF” position and unplug cord 

before replacing light bulbs.

11.Do not place or store appliance where it can fall or 

be pulled into a tub or sink.

12.Do not place in or drop into water or other liquid.
13. If an appliance falls into water, unplug it immediately.  

Do not reach into the water.

  Use on any 120 volt 60 hertz AC electric outlet 

(ordinary house current). Do not use it on any other 

electrical outlet.

SAVE THESE  

INSTRUCTIONS

OPERATING  

INSTRUCTIONS

1.   Your lighted makeup mirror is 5.5 in. diameter 

with 5X and 1X magnification. (Fig. 1)

2.   This unit operates on 3 “AA” batteries (not 

included) or an adapter (included). Plug into any 

standard wall outlet (120 Volt AC). Turn switch to 

the “ON” position.

3.   After use, always turn switch to the “OFF” 

position and unplug the adapter from the wall 

outlet.

4.   The beauty and design of this mirror complement 

any decor. Therefore, you may wish to leave 

the mirror displayed.  However, if you choose 

to store the mirror, see “STORAGE” for detailed 

information. 

5.  Use only new batteries. DO NOT MIX old and new 

batteries. DO NOT MIX alkaline, standard (carbon-

zinc) or rechargeable (nickel cadmium) batteries

.

A.C. ADAPTER

NOTE: unit supplied with a UL listed 3.6VAC adapter. 

For more information, please contact a conair 

service center.

TO REPLACE BULB

CAUTION: TURN OFF POWER AND UNPLUG. ALLOW 

TO COOL AT LEAST 3 MINUTES BEFORE REPLACING 

BULB. 
NOTE: Do not use bulbs other than those supplied 

by Conair.  Contact a Conair service center for 

replacement bulb information.

1.   Unscrew the two side screws on the mirror head.
2.   Carefully remove the 5X Magnification mirror head 

housing.

3.   Unscrew light bulbs and replace with new light

INSIDE VIEW

(Fig. 1)

(Fig. 2)

 

bulb.

4. Replace mirror head by lining up the screw holes 

and screw into place. 

TO INSTALL BATTERIES

1.   Remove battery cover.
2.   Install 3 “AA” new batteries as indicated on battery 

box. (Fig. 2)

3.   Replace battery cover by snapping it into place.

MAINTENANCE

Your lighted mirror is designed for household use and is 

virtually maintenance-free. No lubrication is needed.

If cleaning becomes necessary, disconnect the appli-

ance from the power source and wipe exterior with a 

damp cloth. Clean mirror surfaces with a glass cleaner. 

Do not light until you are certain mirror is completely 

dry.

If any abnormal condition occurs, unplug the lighted 

mirror, allow it to cool, and return it to an authorized 

service center for repair.

Bottom Cover

Unscrew for  

bulb access

Reviews: