![background image](http://html.mh-extra.com/html/carson/attach-a-mag-am-20/attach-a-mag-am-20_instructions-for-use_2564568001.webp)
AM
-
20
To Activate LED Light
To turn light on, slide switch on top of LED housing unit up (Fig.
1
).
Note:
Please remove battery tab before first use.
ATTACH-A-
MAG
FLEXIBLE CLAMP-ON LED LIGHTED MAGNIFIER
Instructions for use:
TM
Fig.
1
To Attach to Table
Squeeze to open base clamp (Fig.
2
).
Clamp onto table edge as shown
(
Fig.
3
)
.
Fig.
2
Fig.
3
Position Magnifier Lens
Bend and twist flexible arm to position lens as needed (Fig.
4
).
If flexible arm is too loose or too tight it can
be adjusted. U
s
e a
phillips head screw driver
to
loosen or tighten screws along flexible arm to adjust tension
(Fig.
5
).
If desired, segments of flexible arm can be removed by loosening screws and pulling segments
apart (Fig.
6
). Attach remaining segments and tighten to secure.
Fig.
4
Fig.
5
Fig.
6