Escene ES380, User Manual

Page: 52 / 55

www.escene.cn/en
ESCENE Communication Limited. 52
When using auto provision, you can set several parameters as follow:
Auto Provision
PNP active The request to the server is to obtain a support URL for upgrade.
PNP Interval (minutes) Setting the PNP interval.
Auto Provision You can enable/disable auto provision by select on/off
Protocol Used for auto provision, it includes TFTP/HTTP/FTP
Software Server URL The server address of the auto provision
Username Providing by provision server
Password Providing by provision server
Auto Download Software Used for auto download software from server
Auto Download Kernel Used for auto download kernel from server
Auto Download Config File Used for auto download config file from server
Auto Download Expansion NOTES: The model does not support this feature.
Auto Download Enterprise
Phonebook
Used for auto download Enterprise Phonebook from server
Auto Download Personal
Phonebook
Used for auto download personal phonebook from server
Booting Checked Used for checking the auto provision when phone booting
Zero Active Enable or disable zero-sp-touch which is used to download configuration on
the server during the phone power on.
Wait Time (1~100s) The time when configuration interface of zero-sp-touch will show up when
power on.
Disable the phone while booting
checking
Enable/Disable the booting checking feature.
Auto Provision Frequency Used for setting the time interval for auto provision
Auto Provision Time Used for the specific time for auto provision
Auto Provision Next Time Reset the Auto Provision Next Upgrading time.
AES Enable You can enable/disable AES encrypt for auto provision
AES Key The key of the AES
Download file name Setting the download file name for Upper case or Lower case
Auto Provision Now Used for doing auto provision immediately
9.5 Log
This feature is use for the administrator to manage the equipment, like debugging, SIP etc., if you need to catch a debugging Level, you
need to setup on this interface.