Escene AP-3, Manual

Page: 78 / 89

Appendix
- 73 -
A FAQs
Q1: I enter 192.168.0.254 in the web browser but cannot access this AP’s web UI. What should I do?
⚫
Verify that Ethernet cables are properly connected.
⚫
Check the TCP/IP settings on your PC and verify that IP address is 192.168.0.X (2 - 253);
⚫
Clear the browser cache or try another web browser;
⚫
Disable the firewall of your PC or try another PC;
⚫
If there are at least 2 APs in your network, and they are not centrally managed by an AC, please connect APs one
by one to the switch and modify their IP addresses.
⚫
If your AP has been managed by an AC, its login IP address might not be 192.168.0.254. Log in to the AC, view the
new IP address of your AP and then use the new one to log in to it.
If you are still unable to log in, please press the RESET button to restore the device to its factory default settings and
follow this install guide to configure your settings again.
Q2: The AP cannot be discovered by the AC. What should I do?
⚫
Verify the AP has been connected properly and powered on.
⚫
If VLAN has been divided in your network, verify that corresponding VLAN settings have been configured on the
AC.
⚫
Restart or reset your AP and try again.
For more info, you can visit our website http://www.escnene.cn/en, send an e - mail to sales@escene.cn , or give us a
call by 020 - 82320720. We will help you out as soon as possible.