B
A
C
D
E
F
G
SER
VICE
47
Remove the 8 screws on the controls tray (shown shaded in the diagram below).
Remove the ‘engine’ by lifting up and to the right. This is still connected internally to the gas hose
and power cables.
S10 Pressure Switch Removal
1. Follow the steps in section E3 “Removing (and Replacing) the Glass” on page 24 on both
the front and back of the appliance to remove the glass. Follow the steps in section E4 “Remove
the Infill & Burners” on page 25 to remove the burners and infill. Carefully remove the floating
ceiling by unscrewing the two screws hidden behind the negative detail.