2
Thank you for choosing the Escali Body Mass Calculating Scale with Infrared Remote. This
precision state-of-the-art measuring instrument is most accurate when weighing on a flat
hard surface. This scale will not function correctly on carpet. As the electronic sensors are
sensitive, avoid dropping or jarring the scale and store where it will be protected from
impact.
1. Power
Place four AAA batteries (total 4) into the battery compartment on the base of the
scale platform. Ensure the +/- terminals are correctly placed as indicated by the dia-
gram within the battery compartment.
On the back of the remote receiver, pull out the insulating tape before
first use from the lithium battery compartment. Note: When “Lo-1” is
shown on the scale, please change the battery in the receiver. When “Lo-
2” is displayed, please change the batteries in the platform.
2. Button Definitions
Press
Up
once to add the parameter
Press
SET
once confirm the data input
Press
Down
once to decrease the parameter.
Unit Key: press to change the weigh mode into KG or LB. The unit key is on the back of
receiver.
Select your desired mode of display by pressing the
kg/st/lb
button on the base of the
scale.
3. Setting Time
Under time display mode, press
Set
for 3 seconds until the
Year
begins flashing on the
display. Press the
Up/Down
buttons to change the value and press
Set
to confirm. Repeat
these steps for the
Month
,
Day
,
Hour
, and
Minute
. Press
Set
: the new time and date will
be shown on the display.
Note: If there is no operation for 20 seconds while setting the time, the scale will auto-
matically return to time display mode.
4. Weighing
1. Place the scale on a hard flat surface.
2. Press and Hold the
Up
button to enter user selection mode. Press the
Up/Down
3
buttons to switch between the 10 available Users (P0-P9). Press
Set
to
select the desired User and display the height.
3. If setting for a new user, press
Set
again and the height will begin to
flash. Press the
Up/Down
buttons to indicate the desired height and
press
Set
to confirm. After finishing the setting, the data will be re-
corded.
4. Stand on the scale within 20 seconds or the
scale will return to time display. First the
weight is recorded and flashes two times.
Then the weight and BMI will alternate on the
display before returning to the time display mode.
5. Alternatively, the scale can be activated by simply tapping the scale with your foot,
and standing on the scale once “0.0” is displayed. If this method is used, the scale
calculates the BMI using User P0’s height data.
5. Body Mass Index (BMI)
Body mass Index (BMI) is a number calculated from a person’s weight and height. BMI
provides a reliable indicator of body fat for most people and is used to screen for weight
categories that may lead to health problems.
6. Infrared Remote Receiver
The remote receiver is removable and wall mountable for easy reading.
Note: Please ensure that the infrared sending point is in a line with the inrafred
receiving point before mounting.
Choose a convenient height position but less than 6’8” /
2 meters in height. Drill two holes 1.56” apart (40mm),
and fix the screws to the wall.
Hang the receiver onto the screws
using the preplaced mounting
points.
Body
Underfat
Standard
Overfat
Obese
BMI
<16.5%
16.5-25%
25-30%
>30%
