11.
Attach legs (#19 & 24) to table top with Hex Bolt (#29), two Plastic Washers (#38) and
Locknut (#34). Attach leg brace to Leg Mounting Bracket (#25) with Phillips Head Screw
(#23) and #10-24 Locknut (#44) as shown in
Detail 1
. Attach leg levelers (#26) to bottom
of the legs (#19 & 24) as shown in
Figure 7
.
5
47
Detail 1A
Flush
Flush
No screw in
this hole
47
Detail 1B
No screw in
this hole
19
29
20
34
44
23
38
25
Detail 1
Leg Brace
24- Right Hand
Leg Assembly
19- Left Hand
Leg Assembly
26
12.
Attach Net Plate (#47) as shown in
Detail 1A
&
Detail 1B
. Make sure the
Nut Plate is flush
with the corner of the table and make sure to
use the
top three holes
in the nut plates.
Note: Nut Plates Mount to one
Table Top Only.
Note:
There are no Indentations guides for
the nut plates on the table top.
Figure 7
7
*NOTE: Hinges not Shown
for clarity.
